Studio renders.
Pro
Pro Clear
Clear and styrene-free, for dings and fills.
Size
In final testing. Reserve from Thanksgiving. First 8 oz jars ship by December 25.
- Styrene-free
- No hardener, no mixing
- Cures in sunlight
- No leftover batch
One part. Nothing to measure or mix. For PU, polyester, epoxy and EPS boards.
One part. Nothing to measure or mix.
The MesaCure™ formula is styrene-free and cures at 365 to 405 nm, in sunlight or under a lamp.
How to use
Fix a ding in three steps.
Before you start: scrape off the wax, sand the ding, wipe it with 99% isopropyl alcohol and let it dry.
01
Fill the ding.
Gloves and safety glasses on. Fill it indoors, out of the sun.
02
Set it in the sun.
Leave it in the sun until it’s hard. A 365 to 405 nm UV lamp works too.
03
Sand it smooth.
Sand it flush with the board.
Tech specs
- Contents
- NET WT 8 OZ (226 g), $40
NET WT 16 OZ (1 LB) 453 g, $48 - Pack
- Opaque jar
- Formula
- MesaCure™, one part, styrene-free
- Cure
- 365 to 405 nm, in sunlight or under a UV lamp
- Boards
- PU, polyester, epoxy and EPS
- Safety Data Sheet
- Pro Clear SDS (PDF) (opens in a new tab)
Safety
WARNING: Causes skin and eye irritation. May cause an allergic skin reaction. Contains 2-hydroxyethyl methacrylate (HEMA) and phenylbis(2,4,6-trimethylbenzoyl)phosphine oxide. Wear nitrile gloves and eye protection. Keep capped and out of sunlight until use. Keep out of reach of children. Read the full cautions on the pack and the Safety Data Sheet before use.
