Surf
Ding repair for surfers.
Two tubes and a kit, for PU, polyester, epoxy and EPS boards. Fill the ding indoors, out of the sun. Cure it in sunlight or under a UV lamp, then sand it flush.
Studio render.
- Styrene-free
- No hardener, no mixing
- Cures in sunlight
- No leftover batch
How it works
Fix a ding in three steps.
Before you start: scrape off the wax, sand the ding, wipe it with 99% isopropyl alcohol and let it dry.
1
Fill the ding.
Gloves and safety glasses on. Fill it indoors, out of the sun.
2
Set it in the sun.
Leave it in the sun until it’s hard. A 365 to 405 nm UV lamp works too.
3
Sand it smooth.
Sand it flush with the board.
Two tubes and a kit.
One part. Nothing to measure or mix. For PU, polyester, epoxy and EPS boards.
Surf
Surf Clear
Clear ding repair resin, in a tube.
$20
- SizeNET WT 2 OZ (56 g)
- CureSunlight or a UV lamp
- BoardsPU, polyester, epoxy and EPS
Surf
Surf Ding Kit
A Surf Clear tube, sandpaper, nitrile gloves and a spreader, in one pouch.
$28
- TubeSurf Clear, NET WT 2 OZ (56 g)
- ToolsSandpaper, nitrile gloves, spreader
- BoardsPU, polyester, epoxy and EPS
Surf
Surf Fiber
Its cautions and Safety Data Sheet will be posted before it goes on sale.
$20
- SizeNET WT 2 OZ (56 g)
In final testing. Reserve from Thanksgiving. Ships in January. Product images are studio renders.
Sunlight does the work.
Our LightSet™ formula hardens in sunlight or under a UV lamp. There’s nothing to mix.
Safety
Surf Clear and Surf Ding Kit
WARNING: Causes skin and eye irritation. May cause an allergic skin reaction. Contains 2-hydroxyethyl methacrylate (HEMA) and phenylbis(2,4,6-trimethylbenzoyl)phosphine oxide. Wear nitrile gloves and eye protection. Keep capped and out of sunlight until use. Keep out of reach of children. Read the full cautions on the pack and the Safety Data Sheet before use.
Surf Fiber
Its cautions and Safety Data Sheet will be posted before it goes on sale.
Repairing boards for a living?
Pro jars for shops and shapers