How-to
Fix a ding
in three steps.
One part. Nothing to measure or mix. For PU, polyester, epoxy and EPS boards.
Before you start: scrape off the wax, sand the ding, wipe it with 99% isopropyl alcohol and let it dry. If the board took on water, let it dry out fully first.
01
Fill the ding.
Gloves and safety glasses on. Fill it indoors, out of the sun.
02
Set it in the sun.
Leave it in the sun until it’s hard. A 365 to 405 nm UV lamp works too.
03
Sand it smooth.
Sand it flush with the board.
- Styrene-free
- No hardener, no mixing
- Cures in sunlight
- No leftover batch
Step-by-step video coming soon.What you need.
- Surf Clear, or the Surf Ding Kit
- Sandpaper, coarse and fine
- Nitrile gloves and safety glasses
- 99% isopropyl alcohol
- A spreader
- Sunlight or a UV lamp
Safety
WARNING: Causes skin and eye irritation. May cause an allergic skin reaction. Contains 2-hydroxyethyl methacrylate (HEMA) and phenylbis(2,4,6-trimethylbenzoyl)phosphine oxide. Wear nitrile gloves and eye protection. Keep capped and out of sunlight until use. Keep out of reach of children. Read the full cautions on the pack and the Safety Data Sheet before use.